Single Pan Gas Fryer CF2

Company's Code RF0000

400mm Single pan gas fryer

help_outlineAsk about product
Single Pan Gas Fryer CF2

Single Pan Gas Fryer CF2

Company's Code RF0000

400mm Single pan gas fryer

 

- 400mm single pan gas fryer

- 90MJ multi-jet target burner

- 25kg/hr production rate

- 30mm drain valve

- Mechanical thermostat

- Manual pilot ignition

- Adjustable front feet and rear rollers

- Two baskets and stainless steel lid supplied

Stainless steel finish

Two baskets and stainless steel lid supplied

Data sheet

Dimension (mm)
W400 x D800 x H915
Capacity
18 litre oil
Supply power
25kW
Weight (kg)
61

16 other products in the same category:

Amerguard

Company's Code RF0000

Specifically designed for the rigorous environments of gas turbine inlet applications, AAF’s AmerGuard range of pocket or bag filters is ideally suited to protect fine and barrier filters such as AAF’s HydroGT.

The AmerGuard is a suitable gas turbine pre-filter in high dust environments, where its high dust-holding capacity will provide a long filter life. The synthetic fibers have a non-woven progressive density for enhanced particulate capture. In addition, moisture resistance properties help to extend the life of the final filters in high humidity environments.

VariCel® S20

Company's Code RF0000

• Economical, evaluated performance and construction

• Engineered for a variety of application

• High dust holding capacity

• Improved efficiency to better protect HVAC coil and high efficiency filters Heavy-duty, galvanized expanded metal support grid

• Moisture-resistant beverage board

• Available in 2” and 4” models

• MERV 14 high-capacity filter

• Easy disposal

MEGApleat® M13

Company's Code RF0000

The MEGApleat 13 filter’s synthetic, electrostatically charged media has a high initial efficiency and is particularly effective in capturing finer particulate.

The media pack is bonded to a unitized, die-cut box frame at all points of contact, preventing dirty air bypass and promoting even airflow. The MEGApleat 13 filter also has a heavy-duty, expanded metal support grid to increase rigidity and help maintain proper pleat spacing. This ensures maximum efficiency, low resistance, and maximizes dust holding capacity with no racking or vibration of the pleats under normal airflow.

BioCel® I

Company's Code RF0000

Rated at 95% efficiency on 0.3 micrometer challenge aerosol, and a MERV 16 per ASHRAE Standard 52.2, the BioCel I filter has the advantage of a much lower pressure drop than a typical HEPA filter (0.4″ versus 1.0″ w.g. at 250 FPM).

This website uses cookies to ensure you get the best experience on our website