Company's Code RF0000

The smaller footprint of the VariCel M-Pak filter means that less space is required for storage. VariCel M-Pak filters weigh approximately 8 pounds, less than half the weight of 12-inch-deep filters with metal cell sides. That means reduced maintenance costs and time savings, as the VariCel M-Pak filter is easier to handle. Additionally, as a result of its reduced depth, the VariCel M-Pak filter is packed two to a carton, lowering freight costs and reducing the amount of space required for storage. The VariCel M-Pak filter also halves disposal volume and reduces disposal costs. Best of all, there is no performance penalty accompanying these savings. The VariCel M-Pak filter meets, or exceeds, the performance of the 12-inch-deep filters it replaces.

Company's Code RF0000

Multiple mini-pleat media packs, assembled into a series of V-banks, permit substantially more media to be contained in the VariCel VXL filter — up to 50% more than standard rigid cartridge filters. Maximum effective media area provides greater airflow capacity, low resistance, high dust holding capacity, and unusually long service life.

Company's Code RF0000

Multiple mini-pleat media packs, assembled into a series of V-banks, permit substantially more media to be contained in the VariCel VXLC filter. Higher effective media area provides greater airflow capacity, low resistance, high dust holding capacity, and unusually long service life.

Company's Code RF0000

Rated at 95% efficiency on 0.3 micrometer challenge aerosol, and a MERV 16 per ASHRAE Standard 52.2, the BioCel I filter has the advantage of a much lower pressure drop than a typical HEPA filter (0.4″ versus 1.0″ w.g. at 250 FPM).

Company's Code RF0000

BioCel II filters are designed for installations in which HEPA quality air filtration is required. As a E11 EN1822:2009 classified air filter, the BioCel II filter is ideal for upgrading an existing non-HEPA installation to a HEPA installation.

Company's Code RF0000

The BioCel III filter is classified E11 in accordance with EN1822 and is designed for high air volume installations. As such, it is the ideal filter for upgrading a non-HEPA HVAC installation into a HEPA installation while also increasing the airflow through the system.

Due to its 4000 m3/h capacity, the BioCel III filter is ideal for new installations. Fewer filters are required to handle the same volume of air, compared to other HEPA filters of the same size.

Company's Code RF0000

Rated 95% on 0.3 μm particles, and a MERV 16 per ASHRAE Standard 52.2, BioCel M-Pak filters have the advantage of a much lower pressure drop than a typical HEPA filter (0.36″ versus 1.0 in. w.g. at 250 FPM). BioCel M-Pak filters fill the gap between ASHRAE-grade high-efficiency filters and ultra-high-efficiency HEPAs, at a much lower weight and pressure drop.

This compact, lightweight filter will withstand operating temperatures to 176°F/80°C, if recommended final resistance is not exceeded. To maximize service life, use BioCel M-Pak filters with high quality AAF Flanders prefilters.

Company's Code RF0000

AstroCel I HEPA filters are used primarily in cleanrooms and clean zones, which require the very highest levels of contamination control. The filter consists of water-proofed, fire-retardant fiberglass media formed into a series of pleats. Corrugated sheets of aluminum separate the pleats to permit maximum usage at minimum resistance. Gasketing is available on the upstream, downstream, or both faces. Extractor clips are available for gel seal Astrocel I HEPA filters, for Bag In/Bag Out housings.

Company's Code RF0000

AAF Flanders’ mini-pleat AstroCel II filters are ideal for demanding operating conditions in critical applications. A longer service life and lower energy consumption means fewer change-outs and lower operating costs.

Company's Code RF0000

AAF Flanders’ mini-pleat AstroCel II filters are ideal for demanding operating conditions in critical applications. A longer service life and lower energy consumption means fewer change-outs and lower operating costs.

Astrocel II filters are available with media ribbon or hot melt separators to meet the requirements of all mini-pleat applications. Pack depths are available between 2“– 4” to optimize energy savings by minimizing total ownership costs.

Company's Code RF0000

Multiple mini-pleat media packs, assembled into a series of V-banks, permit substantially more media to be contained in the filter — double the media typically found in most HEPA filters. Maximum effective media area provides greater airflow capacity, low resistance, high dust holding capacity, and unusually long service life. The V-bank configuration provides greater airflow capacity and longer service life, while lowering operating costs.

Company's Code RF0000

AstroPak Celebrity Series HEPA filters are designed for use in negative air machines for the purposes of abatement, remediation, renovation, and restoration. They feature a rigid mini-pleat media pack with thermoplastic separators sealed in a particle board frame with a polyurethane bond. 1000 CFM and 2000 CFM models are available. The recessed structure afforded by the mini-pleat pack ensures ease of handling.

Every AstroPak filter is individually tested before it leaves the factory, which gives you assurance that it meets rated efficiency. The actual test data is indicated on the label. Each filter is also assigned a serial number, and a permanent record is kept of the construction materials and performance.